Abordaje posterior en fracturas de meseta tibial complejas en pacientes tratados quirúrgicamente en el IAHULA / Posterior approach in complex tibial plateau fractures IAHUL A Surgically treated patients

Las fracturas de meseta tibial compleja se asocian a traumatismo de alta energía, principalmente en accidentes de motocicleta, siendo un desafío para el cirujano ortopedista. En la década de 1970, Schatzker propuso una clasificación radiológica para las fracturas de la meseta tibial, que destacaba la morfología de los seis tipos principales. Las imágenes de tomografía computarizada y tridimensional, han cambiado la comprensión y el tratamiento de las fracturas de la meseta tibial. Recientemente, esa clasificación original se complementó con una más amplia; puesto que, se introdujo el fragmento en cuña dividida y la continuidad de la columna posterior como determinantes de la estabilidad articular y el papel fundamental que desempeña en el tratamiento de las fracturas de la meseta tibial, con ellos también la importancia de abordajes quirúrgicos que permitan la visualización posterior para una adecuada reducción. El estudio documenta las técnicas de fijación interna y abordajes posteriores realizadas en el IAHULA, valorando los resultados clínicos en cuanto a dolor y satisfacción del paciente, como consolidación, pseudoartrosis o falla en la técnica de osteosíntesis realizada. El resultado a partir de las escalas de evaluación de la AO y KOOS, arrojaron que, con un efecto excelentes se agrupa un 28,6% y bueno a un 42,9%, indicando la importancia de la fijación de la columna posterior, para prevenir artrosis postraumática temprana e inestabilidad articular(AU)

A complex fracture of the posterior tibial plateau are related to high energy traumatisms, mainly during motorcycle accidents, becoming a challenge to the ortopedic surgen. During the seventies, Stchatzker proposed a radiologic classification for the tibial plateau fractures that pointed the morphology of six main types. The computarized and tridimensional tomographic images have changed the comprehension and treatment of these fractures. Recently, the original classification was complemented with a more broaded approach due to the introduction of the fragment in divided crib and the continuity of the posterior column as factors determining the articular stability and the fundamental roll played in the treatment of fractures of the tibial plateau, as well as the important roll of surgical approaches that allow the posterior visualization for a correct reduction. This research documents the technics of internal fixation and posterior approach developed in the IAHULA, evaluating the clinic results about patients' pain level and comfort, as well as the radiologic findings of consolidation, pseudoarthrosis, or fail in the technic of osteosynthesis developed. The results from a point of view of the evaluation scales of the AO and KOOS, show 28.6% with excellent outcomes, and 42.9% with good outcomes, indicating the importance of the fixation of the posterior column to prevent early start of posttraumatic arthrosis and articular instability(AU)

Reconstrução de fratura panfacial cominuta ­ relato de caso / Reconstruction of panfacial fracture - case report

RESUMO: Modelo de estudo: Relato de Caso. Importância do problema: As fraturas panfaciais recebem essa denominação quando os terços faciais apresentam fraturas concomitantes. Com frequência, essas lesões estão relacionadas a danos importantes aos tecidos moles, cominuição e perda de segmentos ósseos e/ou dentários, que podem gerar má oclusão e graves deformidades faciais, visto que etiologia de tal condição se deve à acidentes de alta dissipação de energia. O tratamento das fraturas panfaciais com o uso de fixação interna rígida permite restaurar as funções mastigatórias, bem como os contornos faciais. Comentários: O objetivo desse trabalho é relatar a reconstrução de uma fratura panfacial, envolvendo a mandíbula e com elevado grau de cominuição do complexo zigomático orbitário e do arco zigomático, em uma paciente do sexo feminino, em que acesso hemicoronal e retromandibular foram escolhidos para reconstrução e reestruturação do complexo facial. Conclusão: O correto manejo das fraturas panfaciais, é um dos grandes desafios do cirurgião buco maxilo facial, visto o nível de dificuldade para reestabelecer de maneira satisfatória as condições estéticas e funcionais existentes previamente ao trauma. Diferentes sequências de tratamento vêm sendo propostas, podendo ser utilizadas com sucesso após análise adequada do caso clínico e correta indicação. (AU)

ABSTRACT: Study model: Case Report. Importance of the problem: Panfacial fractures receive this designation when the facial thirds have concomitant fractures. Frequently, these lesions are related to important soft tissue damage, comminution, and loss of bone and/or dental segments, which may lead to malocclusion and severe facial deformities, since the etiology of such condition is due to accidents of high energy dissipation. The treatment of the panfacial fractures with the use of rigid internal fixation allows restoring the masticatory functions, as well as the facial contours. Comments: This study aimed to report the reconstruction of a panfacial fracture, involving the mandible and with a high degree of comminution of the zygomatic or zygomatic arch, in a female patient, whose hemicoronal and retromandibular access were chosen for reconstruction and restructuring of the facial complex. Conclusion: The correct management of panfacial fractures is one of the greatest challenges of the maxillofacial surgeon, given the level of difficulty to satisfactorily reestablish the aesthetic and functional conditions existing before the trauma. Different treatment sequences have been proposed to be used successfully after adequate analysis of the clinical case and correct indication. (AU)

Manejo terapéutico del maléolo posterior en fracturas trimaleolares de tobillo: revisión bibliográfica / Therapeutic management of the posterior malleolus in trimaleolar ankle fractures: review / Manejo terapêutico do maléolo posterior em fraturas do tornozelo trimaleolar: revisão bibliográfica

Introducción: El manejo terapéutico de las fracturas de maléolo posterior en las fracturas trimaleolares de tobillo continúa en debate. Nuestro objetivo fue realizar una búsqueda de la evidencia científica sobre los aspectos terapéuticos de las fracturas de maléolo posterior en el contexto de las fracturas trimaleolares. Materiales y métodos: Se realizó una revisión de la bibliografía sistematizada por dos revisores, centrados en el manejo terapéutico del maléolo posterior. Resultados: Se obtuvieron 16 artículos clínicos de un total de 1029 pacientes, 8 estudios nivel de evidencia II y 8 de nivel IV. Se sistematizaron las indicaciones quirúrgicas y se analizaron los resultados funcionales y las complicaciones. Conclusiones: La comprensión pato-anatómica de estas fracturas es cada día mayor, principalmente por la utilización habitual de tomografías computarizadas (TC). El tratamiento quirúrgico sobre el maléolo posterior está evidenciando buenos y excelentes resultados funcionales. Para una adecuada decisión terapéutica se debería tener en cuenta ciertos factores: inestabilidad tibiotalar y sindesmótica, congruencia articular y características morfológicas del maléolo posterior. La reducción abierta (RA) y fijación interna con placa de sostén es el tratamiento que ha demostrado mejores resultados a corto y mediano plazo, no encontrando estudios con seguimiento a largo plazo.

Introduction: The therapeutic management of posterior malleolus fractures in trimaleolar ankle fractures continues in debate. Our objective was to conduct a search for scientific evidence on the therapeutic aspects of posterior malleolus fractures in the context of trimaleolar fractures. Materials and methods: A review systematic of the literature was carried out by two reviewers, focusing on the therapeutic management of the posterior malleolus. Results: 16 clinical articles were obtained with a total of 1029 patients, 8 studies level of evidence II and 8 studies level IV. The surgical indications were systematized, and the functional results and complications were analyzed. Conclusions: The patho-anatomical understanding of these fractures is increasing every day, mainly due to the usual use of CT scans. Surgical treatment on the posterior malleolus shows good and excellent functional results. For an adequate therapeutic decision certain factors should be taken into account: tibiotalar and syndesmotic instability, joint congruence and morphological characteristics of the posterior malleolus. Open reduction and internal fixation with support plate is the treatment that has shown better results in the short and medium term, not finding studies with long-term follow-up.

Introdução: O tratamento terapêutico das fraturas do maléolo posterior nas fraturas do tornozelo trimaleolar continua em debate. Nosso objetivo foi realizar uma pesquisa de evidências científicas sobre os aspectos terapêuticos das fraturas do maléolo posterior no contexto das fraturas trimaleolares. Materiais e métodos : Uma revisão sistemática da literatura foi realizada por dois revisores, com foco no manejo terapêutico do maléolo posterior. Resultados: foram obtidos 16 artigos clínicos com um total de 1029 pacientes, 8 estudos com nível de evidência II e 8 estudos com nível IV. As indicações cirúrgicas foram sistematizadas e os resultados e complicações funcionais foram analisados. Conclusões: O entendimento anatomopatológico dessas fraturas está aumentando a cada dia, principalmente devido ao uso habitual de tomografias computadorizadas. O tratamento cirúrgico do maléolo posterior mostra bons e excelentes resultados funcionais. Para uma decisão terapêutica adequada, certos fatores devem ser levados em consideração: instabilidade tibiotalar e sindesmótica, congruência articular e características morfológicas do maléolo posterior. A redução aberta e a fixação interna com placa de suporte é o tratamento que apresenta melhores resultados no curto e médio prazo, não encontrando estudos com acompanhamento a longo prazo.

3D printed navigation template assists pedicle lag-screw placement for atypical Hangman's fracture / 中华创伤骨科杂志

Objectives To evaluate the 3D printed navigation template used to assist axis pedicle lag-screw placement in the treatment of atypical Hangman's fracture(AHF).Methods From May 2015 to January 2017,12 patients with AHF were treated at Department of Orthopedics,The Fourth Peopled Hospital of Zigong.In their operation,the axis pedicle lag-screw placement was assisted by a 3D printed navigation template.They were 8 men and 4 women,aged from 27 to 53 years(average,45.6 years).There were 7 cases of type Ⅰ,4 cases type Ⅱ and one case of type HA according to the Levine-Edwards classification.There were 2 cases of grade D and 12 cases of grade E according to the assessment of America Spinal Injury Association(ASIA).Their preoperative and postoperative neck pain was evaluated by visual analogue scale(VAS);their preoperative and postoperative ranges of cervical motion were recorded and compared.To evaluate the postoperative safety of screws,the insertion point,position within the pedicle,axial angle and sagittal angle of the screws and maximum fracture displacement were compared between actual operation and simulative operation.Results A total of 12 guide plates were designed and printed;a total of 24 lag-screws were placed.All patients underwent surgery uneventfully.They were followed up for 12 to 20 months,with an average of 14.7 months.Two patients with ASIA grade D recovered to ASIA grade E at the last follow-up.All patients showed a significant improvement in neck pain.Their VAS score at 5 days after surgery(5.86±2.02) was significantly lower than their preoperative score(8.29±1.88)(P<0.05) and their VAS score at the last follow-up(1.73±0.87) was also significantly lower than that at 5 days after surgery(P<0.05).Their range of cervical motion at 6 months after surgery was significantly larger than that at 3 months after surgery(P<0.05);their range of cervical motion returned to normal roughly at the last follow-up,showing no significant difference from that at 6 months(P>0.05).Their postoperative X-ray and CT images showed that the dislocation was all corrected.The last follow-up showed no obvious vertebral instability,screw breakage or loosening.Postoperative CT showed that the 24 screws had been located completely in the pedicle(grade 0),indicating that the screw placement was 100% accurate.The postoperative deviation at insertion point(0.70±0.78 mm),deviation within the pedicle(1.3±0.82 mm),axial angle(8.26°±0.88°) and sagittal angle(22.62°±0.86°) of the screws showed no significant differences from the preoperative simulative data(P>0.05).There was a significant difference in the maximum fracture displacement between the preoperative data(3.94±0.38 mm) and the postoperative data(2.21±0.39 mm)(P<0.05).Conclusion The 3D printed navigation template can be used to better assist axis pedicle lag-screw placement in the treatment of AHF,because it ensures safe screw placement,leading to good reduction and fixation and precise match with the preoperative plan.

Comparison of uniaxial and polyaxial locking plate fixation for Sanders types Ⅳintra-articular calcaneal fractures / 中国医师进修杂志

Objective To compare the radiographic and clinical outcomes of uniaxial and polyaxial locking plates used in the treatment of Sanders types Ⅳ intra-articular calcaneal fractures. Methods A retrospective comparative study was performed on the 72 patients with Sanders types Ⅳintra-articular calcaneal fractures who had been treated by uniaxial locking plates (A group, 38 cases) or polyaxial locking plates (B group, 34 cases) between January 2012 and December 2016. Operation time, intraoperative bleeding, union time, radiological and functional outcomes and functions by the Maryland foot score were compared between the two groups. Results There were no significant differences between the two groups in operation time, intraoperative bleeding, or union time (P>0.05). The patients in A group were followed up for (23.2 ± 5.4) months, and those in B group were followed up for (22.5 ± 4.9) months. All the patients obtained bony union. B group displayed significantly better Bohler angles [(31.6 ± 4.5)° vs. (27.6 ± 6.1)°, (30.7 ± 4.2)° vs.(27.0 ± 5.4)°] and Gissane angles [(109.2 ± 10.8)° vs. (96.8 ± 9.5)°, (107.3 ± 10.1)° vs. (95.4 ± 10.2)°] at 3 and 12 months after operation , compared with A group (P<0.05). Evaluated by the Maryland foot score, the excellent and good rate for the B group was 91.2％(31/34) , which was insignificantly higher than that for the A group (84.2％, 32/38) (P > 0.05). Conclusions Both uniaxial locking and polyaxial locking plates can lead to satisfactory therapeutic outcomes for Sanders types Ⅳ intra-articular calcaneal fractures, but polyaxial locking plates may be superior in stability and functional recovery.

Spring plates in distal radio fractures: "in vitro" mechanical properties / Placa mola nas fraturas distais do radio - propriedades mecânicas "in vitro"

ABSTRACT Background: Distal radius fractures are one of the most common orthopedic injuries and appear in various patterns. Volar plate fixation is not always considered the gold standard treatment. Objective: To measure the resistance of a fragment-specific fixation assembly model obtained by plate fixation associated with different K-wire sizes. Method: In this original experimental study, novel II, axial compression of bone materials was tested. Results: In both groups, the maximum force supported by the fixation method in our study was ten times greater than the physiological load to which the wrist was subjected under physiological conditions. Discussion: In this study, we obtained encouraging results when compared to results reported in the literature. Our study showed that our bone fixating system was mechanically adequate for articular fractures of the intermediate column of the radius (Melone classification). The results were similar or superior to the results of pressure resistance and stiffness when data from the literature was used as reference. Conclusion: The proposed fixation method demonstrated adequate resistance for fixation of the intermediate column of the distal radius. Increasing K wire size caused augmented resistance of the fixation. Level of Evidence II, Prospective comparative study.

RESUMO Introdução: A fratura da extremidade distal do rádio é uma afecção frequente, com variedade de apresentações e nem sempre são passíveis de fixação volar única. Objetivo: Quantificar a resistência obtida no modelo experimental de fixação do fragmento específico, utilizando fio de Kirschner pré moldado, associado a fixação proximal com placa e parafuso. Métodos: Estudo experimental original, nível II, no qual foram realizados ensaios mecânicos com objetivo de avaliar a resistência a compressão axial. Resultados: Os valores de força máxima suportada pelo método de fixação foram pelo menos 10x maiores do que a carga fisiológica a qual o punho é submetido. Discussão: A fixação do tipo fragmento específico vem se mostrando útil e segura, permitindo uma mobilidade precoce segura. Os resultados analisados demonstraram que a montagem proposta em nosso estudo foi mecanicamente adequada para a fixação das fraturas articulares da borda volar ulnar (classificação de Melone) do rádio, tendo resultados semelhantes ou superiores quando comparados a literatura, avaliando a rigidez e a pressão o qual o sistema foi submetido. Conclusão: O método de fixação proposto demonstrou resistência adequada para fixação das fraturas da coluna intermediária do rádio. O aumento da espessura do fio provocou um aumento da força resistida da montagem. Nível de Evidência II, Estudo prospectivo comparativo.

Double femoral osteotomy fixed with a Puddu plate and a retrograde intramedullary nail to treat biapical deformity of the femur / Osteotomia femoral dupla fixada com placa Puddu e haste intramedular retrógrada para tratamento de deformidade femoral biapical

ABSTRACT Biapical femoral deformities are challenging to treat. In order to correct concomitant metaphyseal and diaphyseal deformities of the femur, the authors propose a double femoral controlled osteotomy with combined internal fixation, consisting of a Puddu plate and an intramedullary nail. The method was described in two patients. Results were analyzed using a visual analog scale (VAS), the Lysholm score, and SF-36. No complications were found. Complete consolidation of the osteotomies and radiographic alignment correction were achieved. Results were obtained with a minimum follow-up of 66 months. Both patients had improved for pain (VAS from 60 to 40 and from 50 to 20 at reassessment), function (Lysholm score from 78 to 93 and from 55 to 73) and quality of life (SF-36, both mental - from 40.7 to 57.1 in case one and from 24.7 to 59.7 in case two - and physical - from 27.7 to 45.6 and from 28.2 to 46.8). The authors have found that this technique is a reliable, accurate, and reproducible solution for biapical deformities of the femur.

RESUMO O tratamento das deformidades femorais biapicais é desafiador. Para a correção das deformidades metafisárias e diafisárias concomitantes do fêmur, os autores propõem uma osteotomia dupla femoral controlada com uma fixação interna combinada com uma placa de Puddu e uma haste intramedular. O método foi demonstrado em dois pacientes. Os resultados foram analisados com escala visual analógica (EVA) e os escores Lysholm e SF-36. Não foram encontradas complicações. A consolidação total das osteotomias e a correção do alinhamento radiográfico foram alcançadas. Os resultados foram obtidos com um seguimento mínimo de 66 meses. Ambos os pacientes apresentaram melhoria na dor (EVA de 60 a 40 e de 50 para 20), função (Lysholm de 78 a 93 e 55 a 73) e qualidade de vida (SF36, ambos mentais - de 40,7 a 57,1 no caso um e 24,7 a 59,7 no caso dois - e físico - de 27,7 para 45,6 e de 28,2 para 46,8). Os autores concluíram que essa técnica é uma solução confiável, precisa e reprodutível para deformidades biapicais do fêmur.

A quantitative assessment index assisted by digital technology for matching performance of anatomically contoured plate / 中华创伤骨科杂志

Objective To explore a new way assisted by digital technology to establish a quantitative index to assess the matching performance of anatomically contoured plate. Methods We collected the thin-slice CT data of 20 adults with normal tibias who had received 32-slice spiral CT scanning from April 2015 to June 2016. They were 10 males and 10 females, aged from 28 to 52 years (average, 36.2 years). 3D reconstruction of the tibias was performed with Mimics 18.0. Two brands of 8-hole anatomically contoured plate for distal tibia (Kongli versus GE) were digitized. The curve of the plate facing the bone surface was extracted. The operational process of putting the plate curve on the medial surface of the distal tibia was simulated in Rhino 5.0. The volume of the gap between plate curve and bone surface was measured. The mean distance of the gap between plate cure and bone surface was figured out after the volume divided by the plate area. The inverse value of the mean distance of the gap was used as the index for matching performance. The wall thickness analyzing tool in 3-matic Research was used to mark the various thicknesses of the gap with different colors. The matching performances of the 2 brands of plate were assessed and compared according to the matching performance index and nephogram. Results Of the Kongli 8-hole distal tibial plate, the gap volume was 3,834 mm3± 701 mm3, the mean thickness 1.8 mm ± 0.3 mm, and the matching index 0.56 ± 0.10. Of the GE 8-hole tibial plate, the gap volume was 7,690 mm3± 1,503 mm3, the mean thickness 3.0 mm ± 0.6 mm, and the matching index 0.34 ± 0.06. The significant difference in matching performance between the 2 kinds of plate favored the Kongli plate (t=10.402, P <0.01). There were no significant differences in matching per-formance between different genders among the plates of the same brand (P> 0.05). The nephogram showed a large fixed red area at the proximal part in the GE 8-hole tibial plate. Conclusions As this index for matching performance is simple and intuitive, it can be used to assess and compare the matching performances between different kinds of plates. It can be also used before operation to assess the matching performance of a specific plate for a specific patient to avoid mismatch because of individual differences.

Comparison of medial and lateral locking plates for Schatzker type Ⅵ fractures of tibial plateau: a finite element analysis / 中华创伤骨科杂志

Objective To compare the biomechanical characteristics of medial and lateral locking plates for Schatzker typeⅥfractures of tibial plateau by finite element analysis. Methods A 38 year-old male volunteer was enrolled for CT scan of his lower limbs. His CT images of the left tibial plateau were used for 3D reconstruction of a model of Schatzker type Ⅵ fracture by NX 9.0 software. After the boundary con-ditions were set, a 500 N load was applied to the tibial plateau to simulate the stress on a single leg when an adult weighing 60 kg walked. The displacement and stress on plate and screws were analyzed by Abaqus software. Results The ultimate stress on the model fixated with a medial locking plate was 81.7 MPa, located at the proximal tibiofibular joint surface. The ultimate stress on the model fixated with a lateral locking plate was 487.4 MPa, located at the junction of plate and screws. The ultimate stress on the fibula was much larger in the model fixated with a medial locking plate than in the model fixated with a lateral locking plate. The ultimate displacement was smaller and more homogeneous in the model fixated with a medial locking plate (1.15 mm) than in the model fixated with a lateral locking plate (3.44 mm).Conclusion The Schatzker type Ⅵ fractures of tibial plateau should be fixated with a medial locking plate because it has more biomechanical advantages than a lateral locking plate.

One-stage minimally invasive surgery for femoral and ipsilateral tibial plateau fractures with a rapid reductor / 中华创伤骨科杂志

Objective To investigate the fixation sequence,key points and clinical value of a new minimally invasive surgery for one-stage treatment of femoral and ipsilateral tibial plateau fractures with a rapid reductor.Methods From October 2015 to January 2017,5 patients with femoral and ipsilateral tibial plateau fractures received surgery at our department.They were 4 men and one woman,aged from 23 to 65 years (mean,45.5 years).The femoral fractures were type A in 2 cases,type B in 2 cases and type C in one case according to AO/OTA classification.The tibial plateau fractures were type Ⅴ in 2 cases and type Ⅵ in 3 according to Schatzker classification.After the tibial plateau fractures were first fixated,Kirschner wires were inserted via the femoral condyle and distal tibia.A rapid reductor was used to reduce the tibial plateau and dual plates were implanted by percutaneous minimally invasive internal fixation.Then the same set of rapid reductor was used to treat femoral fractures by antegrade femoral nailing.The bone traction was completed via the femoral condyle and anterior superior iliac spine.The operative time,bone union time,knee functional recovery and hospital stay were recorded.Results The 5 patients were followed up for an average of 10 months (from 7 to 17 months).No delayed union,nonunion or malunion happened of either femoral or tibial plateau fractures.The healing time for femoral fractures ranged from 4 to 8 months,averaging 5.5 months;the union time for tibial plateau fractures ranged from 10 to 14 weeks,averaging 12.0 weeks.The knee flexion averaged 110° (from 95° to 130°).The overall functional recovery was rated as excellent in 2 cases and good in 3 according to the Karlstr(o)m & Olerud criteria.The average hospital stay was 18 days(from 13 to 32 days).Conclusion Minimally invasive surgery with a rapid reductor can treat femoral and ipsilateral tibial plateau fractures at one stage,leading to fine functional recovery of the knee and greatly reduced hospital stay in particular.

Fracture restoration technique based on 3D printing used in distal tibiofibular fractures / 中华创伤骨科杂志

Objective To explore a 3D printing model of fracture restoration which can be used in preoperative planning and design for distal tibiofibular fractures.Methods A retrospective analysis was performed of the 35 patients with distal tibiofibular fracture who had been treated from October 2015 to September 2016 at our department.Bilateral tibiofibular CT scan was performed in all the cases to obtain Dicom data.Using Mimics 15.0 software,cross sections were created at 5 cm,10 cm and 15 cm above the knee joint at the bilateral upper tibiae and marked as PT5,PT10 and PT15.The long and short axles on the left and right sides were measured and compared (LL vs.RL;LS vs.RS).After the STL files for 3D models were generated using Mimics 15.0 software,a real-sized 3D model of the distal tibiofibular fracture and a mirror model of the contralateral tibiofibula were printed.The fracture lines were drawn and preoperative manoeuvre was performed on the mirror 3D printed model.The real operation used the implants preoperatively designed;the actual screw lengths were measured and compared radiographically with those designed in the preoperative manoeuvre.Results All the data were collected of the long and short axles on the 3 cross-sections (PT5,PT10 and PT15) of the left and right sides of the proximal tibia.The samples were paired into 6 groups.The correlation coefficients of paired samples were greater than 0.95,showing an extremely strong correlation.The differences between the left and right sides showed no statistically significance in paired samples of LR-RL and LS-RS groups on PT5,PT10 and PT15 cross-sections (P ＞ 0.05).All the 35 cases received surgical operation.The postoperative X-ray review showed fine agreement between actual surgery and preoperative design in terms of screw length and accuracy.The deviations were in an allowable range,leading to satisfactory internal fixation.Conclusions A mirror 3D model of the healthy side is of clinical value to some extent because it can serve as one for an anatomically reduced fracture which can be used for preoperative manoeuvre and preparation of implants.The contrasts between the long and short axles on the 3 cross-sections may simplify and facilitate comparisons of bilateral similarity,avoid the blindness in direct application of the health side mirror model for preoperative planning.

Comparison of cannulated lag screw versus buttress plate fixation for posterior malleolar fractures / 中华创伤骨科杂志

Objective To compare the clinical outcomes of percutaneous cannulated lag screws versus posterior buttress plate in the fixation for posterior malleolar fractures.Methods We reviewed the 167 patients who had been treated between January 2010 and December 2014 for ankle fracture involving larger than 25％ of the articular surface of the posterior malleolus.They received posterior malleolus fixation with percutaneous cannulated lag screws or with a buttress plate.In the cannulated screw group (84 patients),there were 47 males and 37 females,aged from 23 to 72 years (average,49.7 ±9.1 years),and 39 cases of type B and 45 ones of type C according to the Dennis-Webber classification.In the buttress plate group (83 patients),there were 38 males and 45 females,aged from 31 to 69 years (average,52.3 ± 8.3 years),and 45 cases of type B and 38 ones of type C according to the Dennis-Webber classification.At 6 and 12 months postoperation and the final follow-up,the ankle motion was evaluated using American Orthopaedic Foot and Ankle Society (AOFAS) score and range of motion (ROM).Results The average operation time for the cannulated screw group was significantly shorter than for the buttress plate group (Z =-9.145,P ＜ 0.001).No fracture nonunion,reduction loss or incision infection happened in either group.In the cannulated screw group,we detected malunion with a step-off beyond 2 mm in 5 patients,and penetration of one cannulated lag screw into the tibiofibular syndesmosis in 3 patients.In the buttress plate group,we detected toe flexion contracture in 4 patients,and uncomfortable feeling in ankle motion in 7 patients.At the final follow-up,X-rays and CT scans in the 2 groups showed no obvious post-traumatic osteoarthritis of the ankle.There were no significant differences between the 2 groups regarding the AOFAS scores at 6 and 12 months postoperation and the final follow-up(P ＞ 0.05);the AOFAS scores at the final follow-up for all the patients were significantly different from those at 6 and 12 months postoperation (P ＜ 0.05).At the final follow-up,there were no significant differences between the 2 groups regarding ROMs of dorsal flexion,plantar flexion,varus or valgus (P ＞ 0.05).Conclusions As there are no significant differences between the percutaneous cannulated lag screws and posterior buttress plate in AOFAS score and ROM of the ankle after fixation for posterior malleolar fractures,the 2 fixation methods can both achieve good clinical outcomes.Fixation with cannulated lag screws has advantages of indirect reduction and minimal invasion but also a disadvantage of uncertain quality of reduction;fixation with buttress plates has an advantage of anatomical reduction under direct vision but also shortcomings of relatively large invasion and high cost.

Comparison of uniaxial and polyaxial locking plate fixation for complex intraarticular calcaneal fractures / 中华创伤骨科杂志

Objective To compare the radiographic and clinical outcomes of uniaxial and polyaxial locking plates used in the treatment of complex intraarticular calcaneal fractures.Methods A retrospective comparative study was performed on the 50 patients with intraarticular calcaneal fracture (Sanders types Ⅲ and Ⅳ) who had been treated by uniaxial locking plates (n =26) or polyaxial locking plates (n =24) between January 2013 and June 2015.Operation time,intraoperative bleeding,union time,radiological and functional outcomes and functions by the Maryland foot score were compared between the 2 groups.Results All the patients were followed up for 12 to 44 months(average,20.8 months).There were no significant differences between the 2 groups in average operation time (105.2 ± 18.2 min versus 95.5 ± 17.7 min),average intraoperative bleeding (125.2 ±23.4 mL versus 120.3 ±21.5 mL),or union time (12.1 ± 3.7 weeks versus 11.8 ± 3.7 weeks) (P ＞ 0.05).All patients obtained bony union.The polyaxial locking plates group displayed significantly better B(o)hler and Gissane angles at 3 and 12 months after operation than the uniaxial locking plates group (P ＜ 0.05).Evaluated by the Maryland foot score,the excellent and good rate for the polyaxial locking plates group [91.7％ (22/24)] was insignificantly higher than that for the uniaxial locking plates group [84.6％ (22/26)] (P =0.267).Conclusions Both uniaxial locking and polyaxial locking plates can lead to satisfactory therapeutic outcomes for complex intraarticular calcaneal fractures,but polyaxial locking plates may be superior in stability and functional recovery.

Biomechanical characteristics of four fixation methods in treatment of pubic symphysis disruption: a finite element analysis / 中华创伤骨科杂志

Objective To evaluate the biomechanical characteristics of 4 fixation methods (single reconstruction plate,dual reconstruction plates,single cannulated screw and dual cannulated screws) in the treatment of pubic symphysis disruption.Methods Miniature spiral CT scans were performed on the complete pelvis in 5 healthy volunteers.The primary two-dimensional CT scan data at Dicom format were imported into software Mimics 15.0 for three-dimensional reconstruction of bilateral hips and sacrums.The finite element model of skeletal pelvis was obtained by grid partitioning and assignment using software Abqus 6.13.Models of pubic symphysis disruption were simulated by cutting off the unilateral sacroiliac ligament,sacral spine ligament,sacral tuberosity ligament,pubic ligament and pubic arch.Four implants(single reconstruction plate,dual reconstruction plates,single cannulated screw and dual cannulated screws) were simulated and emplaced onto the models according to standard surgical procedures.Compressive and rotational loads were implemented in all models for finite element analysis.The biomechanical properties were recorded and analyzed,including construct stiffness,micromotion of the pubic symphysis and yon Misses stress.Results Under vertical load,the space of pubic symphysis disruption ＞ 25 mm.The vertical stiffness and rotational construct stiffness of the pelvis decreased significantly from 442.738 ±29.946 N/mm and 10.118 ± 1.432 N · m/Deg in the normal group to 14.754 ±0.876 N/mm and 0.328 ±0.119 N · m/Deg,respectively.Dual reconstruction plates and dual cannulated screws displayed the best vertical tensile strength;their construct stiffness achieved 117.647 ±9.193 N/mm and 131.443 ±4.348 N/mm,respectively.Under anti-rotation load,dual cannulated screws displayed the best performance because they rebuilt 68.6％ of the whole structural stiffness.For the local stability of the pubic symphysis,dual reconstruction plates showed a strong local anti-rotation capability and dual cannulated screws a good local anti-tensile capability.The displacement in the dual cannulated screws group was only-0.240 ±0.119 mm under vertical load while the angular displacement in the dual reconstruction plates group only 0.218°±0.182°.Single reconstruction plate endured the maximum yon Misses stress which was obviously concentrated.Conclusion Dual cannulated screws may have biomechanical advantages for treatment of pubic symphysis disruption.

Causes for difficulty in removal of locking plate and screws and their handling skills / 中华创伤骨科杂志

As locking plate is widely used in periarticular and comminuted fractures as well as in fixation of osteoporotic bone,the events involving difficulty in removal of a locking plate increase gradually.Little research addresses the difficulty in implant removal.Stripping of the recess of the screw head,cross-threading between threads in the screw head and screw hole and cold welding are the main causes for difficulty in removing screws from a locking plate.Skills for implant removal include simple ones that require no use of special devices and complex ones that require use of special devices.Difficult implant removal will result in lengthened operation time,increased risk of secondary invasive surgery,residues of metallic shavings and so on.Prevention is the most effective countermeasure.This review summarizes the cause for difficult removal of locking plate and screws as well as the removing skills to help orthopedic surgeons prevent and respond to the difficulties intraoperatively.

Posterior instrumentation and fusion for treating ankylosing spondylitis combined with lower cervical fractures / 中华创伤杂志

Objective To investigate outcomes of posterior instrumentation and fusion in treating ankylosing spondylitis (AS) combined with lower cervical fractures.Methods A retrospective case series study was made on 53 AS patients combined with cervical fractures or cervical thoracic fractures treated by posterior instrumentation and fusion from January 2006 to January 2013.There were 51 male and 2 female patients.The mean age of patients was 55 years old (range,34-69 years old).All the patients showed significant kyphosis on the thoracolumbar and cervicothoracic junction.A total of 20 patients had neurological dysfunction at different extents.According to the American spinal injury association (ASIA) classification,neurological status was scored as Grade A in 4 cases,Grade B in 5,Grade C in 4 and Grade D in 7.The operation time,total bleeding and decompression status were recorded during the surgery.Reduction,decompression condition and complications were evaluated.The neurological status and bone fusion were recorded at the follow-up.Results All surgeries were well accomplished.Mean surgical time was 3.7 h (range,2.9-5.3 h).Mean total bleeding was 690 ml (range,470-1 600 ml).Two patients died within 1 year follow-up because of internal diseases (1 case caused by respiratory system disease in 13 months postoperatively and 1 case caused by acute myocardial infarction in 15 months postoperatively).The mean follow-up time of other patients was 25 months (range,18-48 months).The CT scan manifested all patients achieved satisfactory fusion,and the mean time span of the fusion was 3.5 months (range,3-6 months) postoperatively.Among the 20 patients with various levels of neurological deficits before operation,the postoperative ASIA score was Grade A in 4 cases,Grade C in 2,Grade D in 4,and Grade E in 10.No instrumentation failure occurred during follow-up.Conclusion The posterior instrumentation and fusion for treating AS combined with cervical fractures can obtain satisfactory neurological results,spinal stabilization and clinical results,and hence an effective clinical problem-solving algorithm for such kind of patients.

Posterior instrumentation and fusion for treating ankylosing spondylitis combined with lower cervical fractures / 中华创伤杂志

Objective To investigate outcomes of posterior instrumentation and fusion in treating ankylosing spondylitis (AS) combined with lower cervical fractures.Methods A retrospective case series study was made on 53 AS patients combined with cervical fractures or cervical thoracic fractures treated by posterior instrumentation and fusion from January 2006 to January 2013.There were 51 male and 2 female patients.The mean age of patients was 55 years old (range,34-69 years old).All the patients showed significant kyphosis on the thoracolumbar and cervicothoracic junction.A total of 20 patients had neurological dysfunction at different extents.According to the American spinal injury association (ASIA) classification,neurological status was scored as Grade A in 4 cases,Grade B in 5,Grade C in 4 and Grade D in 7.The operation time,total bleeding and decompression status were recorded during the surgery.Reduction,decompression condition and complications were evaluated.The neurological status and bone fusion were recorded at the follow-up.Results All surgeries were well accomplished.Mean surgical time was 3.7 h (range,2.9-5.3 h).Mean total bleeding was 690 ml (range,470-1 600 ml).Two patients died within 1 year follow-up because of internal diseases (1 case caused by respiratory system disease in 13 months postoperatively and 1 case caused by acute myocardial infarction in 15 months postoperatively).The mean follow-up time of other patients was 25 months (range,18-48 months).The CT scan manifested all patients achieved satisfactory fusion,and the mean time span of the fusion was 3.5 months (range,3-6 months) postoperatively.Among the 20 patients with various levels of neurological deficits before operation,the postoperative ASIA score was Grade A in 4 cases,Grade C in 2,Grade D in 4,and Grade E in 10.No instrumentation failure occurred during follow-up.Conclusion The posterior instrumentation and fusion for treating AS combined with cervical fractures can obtain satisfactory neurological results,spinal stabilization and clinical results,and hence an effective clinical problem-solving algorithm for such kind of patients.

Comparative study of minimally invasive percutaneous pedicle screw fixation and open surgery in the treatment of thoracolumbar fractures / 中国骨伤

<p><b>OBJECTIVE</b>To compare the clinical outcomes of minimally invasive percutaneous pedicle screw fixation and open surgery in the treatment of thoracolumbar fracture.</p><p><b>METHODS</b>A retrospective study of patients who had undergone surgery for thoracolumbar fracture from June 2014 to December 2014 was performed. Sixty-one cases were included and 29 cases were treated by minimally invasive percutaneous pedicle screw fixation (minimally invasive group) and 32 cases were treated by the traditional open pedicle screw fixation(open group). The differences in the total length of the incision, intraoperative fluoroscopy times, operative time, blood loss, the preoperative and postoperative visual analogue scale(VAS), postoperative bedridden time and hospital stay were compared. And the preoperative and postoperative anterior vertebral body height and Cobb angle of the kyphosis were also compared.</p><p><b>RESULTS</b>Compared with the open group, the total length of incision was smaller and intraoperative blood loss was less, bedridden time and hospital stay were shorter, and pain of the wound was less in the minimally invasive group. Postoperatively, the anterior vertebral body height was retorted and the Cobb angle of the kyphosis was corrected obviously in both groups. But no significant difference in the imaging results was found between two groups(>0.05).</p><p><b>CONCLUSIONS</b>Minimally invasive percutaneous pedicle screw fixation has the similar fixation efficacy with open surgery in treating thoracolumbar fracture. However, it can avoid extensive muscle stripping, and obviously reduce the surgical incision, operative time, postoperative pain, bedridden time and hospital stay. According to the clinical efficacy, it is worthy of clinical application.</p>

Treatment of scapular fractures with lateral incision and bridge combined internal fixation system / 中国骨伤

<p><b>OBJECTIVE</b>To investigate the clinical results of scapula fractures with lateral incision combined with bridge internal fixation system.</p><p><b>METHODS</b>From October 2012 to December 2016, 20 cases of scapular fractures were treated through the lateral incision combined with bridge fixation system, including 15 males and 5 females, with an average age of 31.6 years old(ranged, 21 to 52 years old). Fourteen cases were scapular body fracture, 10 were scapular neck fracture, 6 were scapular fracture, 1 was acromion fracture, 1 was coracoid fracture, 4 were the glenoid rim fracture, 3 were the glenoid fossa fracture. The operation time ranged from 4 to 15 d after injury with an average of 10 d.</p><p><b>RESULTS</b>All 20 cases were followed up for 3 to 24 months with an average of 15 months. Wound infection occurred in 2 cases after operation, and was healed after wound debridement and change dressing; no osteomyelitis, iatrogenic nerve injury, breakage of internal fixation, fracture displacement, joint stiffness occurred. Callus growth was observed at the fracture site 3 months after operation, the fracture healing time was 4 to 7 months, fracture healing was good without delayed union or malunion. According to Hardegger shoulder score, the results were excellent in 12 cases, good in 6 cases, moderate in 2 cases.</p><p><b>CONCLUSIONS</b>Lateral incision approach combined with bridge internal fixation system for scapula fractures has the advantages of easy operation, revealed clearly, and the incision can be arbitrary to extend on both sides, to provide favorable conditions for the reduction and fixation of fracture. Bridge combined internal fixation system has the advantages of flexible operation, reliable fixation strength, is a good choice for treatment of scapula fracture.</p>

Treatment of perinail refracture following surgery of proximal femoral fracture / 中华创伤骨科杂志

Objective To investigate the treatment of perinail refracture after surgery of proximal femoral fracture.Methods From January 2010 to January 2015,we treated perinail fractures in 31 patients who had undergone surgery for proximal femoral fracture.They were 11 men and 20 women,with an average age of 75.6 years (range,from 24 to 87 years).On average,their refracture occurred 9.4 months after primary fixation (range,from 3 to 60 months).With reference to the Vancouver classification of peri-prosthestic refractures in the proximal femur and the position and bone quality of perinail refractures,we tried to classify the perinail fractures and chose different treatment protocols accordingly.In our cohort,6 were type A,5 type B,15 type C,and 5 type D.Type A cases were treated conservatively,and types B and C cases with locking compression plate or less invasive stabilization system.In one case of type D,dynamic hip screws were implanted to fixate the femoral neck fracture after removal of the original intramedullary nail,and hip replacement was conducted in the other 4 after removal of the original intramedullary nail.Results The operation time averaged 2.1 hours (range,from 1.6 to 3.0 hours) and intraoperative bleeding 600 mL (range,from 150 to 800 mL) in this cohort.Of them,27 were followed up for an average of 15 months (range,from 12 to 24 months),giving a follow-up rate of 87.1％ (27/31).Six type A fractures obtained bone union after protected weight-bearing walking for 12 weeks.All the 16 fractures of types B and C healed after an average period of 4.2 months (range,from 3 to 6 months).Of the 5 type D fractures,one obtained bone union 12 weeks after change into dynamic hip screwing and 4 had fine functional recovery after hip replacement.No infection,nonunion,or implants failure occurred.Conclusions We have set an exploratory classification system for the perinail refractures at the proximal femur with reference to the Vancouver classification of peri-prosthestic refractures.Our classification can provide effective guidance for the treatment of perinail refracture after surgery of proximal femoral fracture.